Offshoreonly.com - Polishing Imron?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Detailing, Painting, & Fiberglass (https://www.offshoreonly.com/forums/detailing-painting-fiberglass-167/)

- - Polishing Imron? (https://www.offshoreonly.com/forums/detailing-painting-fiberglass/130097-polishing-imron.html)

24degrees

05-13-2006 11:01 PM

Polishing Imron?

What should I use to polish the Imron on my boat?

RedDog382

05-14-2006 12:59 AM

Re: Polishing Imron?

I have always used Meguire's Fine Cut Cleaner followed by Star-brite teflon wax.

Gmoney52

05-21-2006 10:50 PM

Re: Polishing Imron?

AMEN Ginger! We used Imron esclusively at FPB and after a few weeks, it is like Awlgrip! # 2000 W/D is about all you would want to sand with and then it will take 2 or 3 compounds and graduated pads to keep from "swirling up." When it gets outside, you will be able to see the buff marks unless you have a few years under your belt. Goob luck!

All times are GMT -5. The time now is 04:42 AM.