few more for now..

Checkmate Convincor reflection from LOTO courtesy of Leverage.

donnie, what did you use to get the vinyl clean on that cobalt? I have a winter project that is not anywhere near that bad. but bad enough that I was considering new vinyl. wow

scott

Thanks Scott! I use my Vinyl/Leather Cleaner with the wet scrub pad and then follow up with my Conditioner. It all depends on what stained the vinyl. I had one customer that spilled half a bottle of 20w50 on his hatch and let it set for a week. I got 95% of it out then let the sun do the rest over time. Two months later and the vinyl looks new. Let me know if you need anything.

Donnie

not really stained just older boat with some mildew here and there, thought about just replacing but is still in pretty good shape so I think I will try and clean first.

I have used the Magic Erasers on the Vinyl with GREAT Results, time consuming but a little elbow grease, not to much and it comes out looking new.

Bryan

Hi Bryan,

Welcome to the board! I agree with you on the Eraser, but be careful about moderation. They work well, but should only be used when the staining is that bad. Always be sure to wipe with fresh water and also follow up with a Conditioner like mine. Use my Vinyl Cleaner for everyday cleaning and dirt/mildew removal. It's Vinyl/Leather safe and you won't have to worry about premature deterioration.

Donnie

Leverage Oxidation Remover
 

One we did last week.

Before, During & After...

Couple More..

Man that was a cold day. Looking forward to next season!