|
Stringer!
I have what looks like a single piece of 3/4" plywood for a stringer that holds the starboard side of the starboard motor (BBC) that cracked...
Is this normal for formula? 3/4 plywood to hold that much weight? How do I replace that piece and achieve more strength... I don't want to run screws thru the hull/ transom? I pulled the starboard motor tonite and am scratching my head at this point... |
cut/grind the old stringer out and replace. post a couple piks so we can see exactly what your dealing with...
|
|
I cant post pics...
the Stringer is not rotten, just cracked behind the motor mount... It seems like a poor design, it sticks up 6" above the shelf that goes to the hull side and gives it the strength... the motor mount is attatched in this 6" area near the top of the board. |
Originally Posted by f_inscreenname
(Post 3382662)
|
can you post the pics for me?
|
Originally Posted by mung272
(Post 3383934)
can you post the pics for me?
|
| All times are GMT -5. The time now is 02:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.