interlux bilgekote
 

What are your thoughts on this paint?, I started to paint the bilge and it seems like good paint, generally I usually gelcoat.

I used it in my cruiser last winter. Stuff is hard as nails, easy to clean and have yet to get a stain. But then I don't have any leaks.
A couple weeks ago I did some rewireing and needed to do some touch up over old screw holes. The paint had yellowed a slight amount. Wasn't noticeable till I hit those few screw holes with fresh paint.
I'd use it again without a thought.

It's fine for what it is. I'd prefer to use imron (rolled or brushed on with a little flattening additive in it) over it though...