Hey john good to hear from you, this build started off with my 28ss sonic hull. but now its a full custom 30' sonic roadster aka(SR30). i just got do block sanding the starboard side for the 3 time tonight lol. im going to try to get the port side done tomorrow when i get off work. i gave the signature to a buddy of mine he wants to cut the deck off and make it a center console out of it.

worthless without pictures lol:party-smiley-004:

ill get some more asap!

sealed the fuel tank area and foaming tank in tomorrow i hope, fitting the ssm#5 stand off box before i cut a big a$$ hole in my boat lol[ATTACH=CONFIG]505685[/ATTACH][ATTACH=CONFIG]505684[/ATTACH][ATTACH=CONFIG]505683[/ATTACH]

Real nice job on building the tank cradle........The tank will be one with the boat once it's foamed in!

looking good :nicethread:

[ATTACH=CONFIG]506251[/ATTACH][ATTACH=CONFIG]506252[/ATTACH][ATTACH=CONFIG]506253[/ATTACH]Made my water pick up today, im going to flush mount it in the pad on the bottom. so i will not have to see a gody pick up hanging off the back of the transom.

Looks nice. Any concerns with water flow to the prop mounting it on the pad or will that not be a problem since you are running a SSM #5?

Not going to be a problem, it only sticks down 1/2" at its lowest point. i don't think it would even matter if i was going to use a bravo drive. i still might have to trim some off the back of the pickup, ill have to see how much psi i'm going to have i think it might be a little high.

ryan your building a kick azz boat, what you have done is amazing. I wish I had your energy to work on mine like that. keep up the good work.