I use 11110, sorry i didnt catch ya on the other thread just been super busy in the shop.

So how much does a typical transom need? I suspect its only sold in 5 and 55 gallon barrels only. Stuff is $$$$$$$$! Shipping cost and it's a hazmat product.

maybe two gallons for a typical transom and bilge stringers, sometimes as little as a gallon though for just a transom. where are you located? I get a five gallon pail for $135 and dont pay hasmat when truck freight FedEx but I am usually getting several items on a full pallet.

Thanks Dave! I'm in Phoenix Arizona and haven't been able to find any locally. Any ideas? If I could order a 5 gallon pail from where you get it, that would be awesome, although prob not as you are getting it bulk.

THANKS for the clarification GlassDave!!!!!! Still waitin' on the first issue of your book!!!! LOL!
Any recommendations for using this product this time of year (we're averaging about 65 - 68 degrees) during the days.....Not sure if the instructions give clear details on amounts of hardener for various temperatures

Hi Glass Dave, Where do I get Corebond?

Sent you a PM regarding where I located it fairly reasonably priced. Cheap HAZ MAT shipping as well.

Hey Borgie - I'm not sure if you were sending me a PM regarding where I can purchase the Corebond bedding compound, but I've been reading your posts and would appreciate any recommendations for the 'bedding compound' you used on your transom repairs I'm in Sacramento, California - Thanks!

This is the cheapest I was able to find online. Very reasonable shipping!

https://www.apdmro.com/mobile/Produc...de=70006474343

Hey Borgie - THX!!!!!