![]() |
Must be southern pine sap is tougher than white pine. That's what I have and acetone takes it off very easy, then a quick polish job and yer good to go.
|
I had
|
Sorry about that... posted before I was ready... not sure how to delete. Here is what I intended to post...
I had this issue with a Bayliner I bought- parked it under a pair of pine trees in the back yard for a year and by the time I realized it was a problem; I had a mess! Tried everything listed above (except the butter... may have to give that a shot next time) but what I found worked best was waterless hand sanitizer. Buy the big pump bottle from a dollar store and use it generously- I put a big dollop of it on the pine sap and covered it with a paper towel for a few minutes then just a little rubbing took it right off. It's best to use paper towels because that pine sap is a mess no matter what you do to it, and I didn't want it on rags laying around the shop. |
Originally Posted by Gordo
(Post 4229149)
My boats always lived in a shop and never lived out of cover... until I moved to Florida. It seems owning your own shop/barn down here is only for the rich & famous?
Anyway, I bought a nice full cover some time ago, but STILL trying to get the sap off. I realize I ain't reel smartt these dayz, :crazy: so I figured I would go to those who knew. Thanks for the ideas! |
You can use a green scrubby.... Whoops, that's a bad idea. My wife learned that one the hard way when we first started dating. Luckily it was her car and not mine. I still cringe when I think about it... Hope you find something that works. I like the bug and tar remover...
|
I have tried a lot of things getting tree sap off the boat and the best thing I came up with is this.
https://www.youtube.com/watch?v=LMInvh4PFGY |
Mineral spirits.
|
Rob, It's all good! Let's face it, parking under a pine tree with only a cockpit cover ain't the smartest thing, but at the time, I had no other options.
In a lot of trial and failure, I DID find something that worked great, and I had it all along. I found a can of GM weatherstrip adhesive remover on my shelf from mo old dealership mechanic days (almost 30 years ago). A well soaked rag, let the juice do the work with minimal rubbing, and got em one tar-drop at a time. I then hand washed the whole thing with old school hot-soapy water. Covered the boat and tomorrow I'll pull out the buffer for polish & wax. |
Excellent news. Nothing worse than looking at you're stuff. N seeing anything but what you want to see. Good luck. :-)
|
Originally Posted by SocialTherapy
(Post 4230767)
Sorry about that... posted before I was ready... not sure how to delete. Here is what I intended to post...
I had this issue with a Bayliner I bought- parked it under a pair of pine trees in the back yard for a year and by the time I realized it was a problem; I had a mess! Tried everything listed above (except the butter... may have to give that a shot next time) but what I found worked best was waterless hand sanitizer. Buy the big pump bottle from a dollar store and use it generously- I put a big dollop of it on the pine sap and covered it with a paper towel for a few minutes then just a little rubbing took it right off. It's best to use paper towels because that pine sap is a mess no matter what you do to it, and I didn't want it on rags laying around the shop. +1 Hand sanitizer pour it on walk away come back later wipe it off your done. |
| All times are GMT -5. The time now is 11:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.