Offshoreonly.com - When cutting out stringers and bulkheads, is a trailer enough support?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Detailing, Painting, & Fiberglass (https://www.offshoreonly.com/forums/detailing-painting-fiberglass-167/)

- - When cutting out stringers and bulkheads, is a trailer enough support? (https://www.offshoreonly.com/forums/detailing-painting-fiberglass/324302-when-cutting-out-stringers-bulkheads-trailer-enough-support.html)

cyrus77

03-21-2015 09:04 PM

When cutting out stringers and bulkheads, is a trailer enough support?

When cutting out stringers and bulkheads, is a trailer enough support?

Engine, drives, tank, and all interior out,. Deck is fiberglassed on. I need to replace stingers and bulkheads and I want to know if additionally bracing is usually required. 33 ft boat.
Thanks,

Drew555

03-21-2015 09:14 PM

Does it have a balsa core?

cyrus77

03-21-2015 10:10 PM

The hull no. 2 steps in hull. Trailer fits real nice.

scarabman

03-22-2015 11:47 AM

You have that much rot in your 33? Which bulkheads are you doing? Just engine compartment forward one? Stringers in engine compartment or under cockpit around tank?

All times are GMT -5. The time now is 07:47 AM.