|
https://cimg2.ibsrv.net/gimg/www.off...61edf123a2.jpg
Finished buffing the deck, and went around from the belt line up buffing so i could install some of the trim. |
Beautiful work.
What material are you using for the cabinets? |
Originally Posted by Shah Mat
(Post 4894062)
Beautiful work.
What material are you using for the cabinets? |
|
https://cimg8.ibsrv.net/gimg/www.off...f562948760.jpg
Couldnt find a swim platform that i liked. Bought some tube and bent the corners. Cut the plate with a hand held dewalt 6" circular saw. Rounded the corners with a router and 1/8 radius bit. Bits and blades have all been wood stuff that has worked surprisingly well. |
Originally Posted by justintocars
(Post 4897668)
https://cimg8.ibsrv.net/gimg/www.off...f562948760.jpg
Couldnt find a swim platform that i liked. Bought some tube and bent the corners. Cut the plate with a hand held dewalt 6" circular saw. Rounded the corners with a router and 1/8 radius bit. Bits and blades have all been wood stuff that has worked surprisingly well. In the event you haven't been using it up til now and you're not done using the router, a bit of WD40 will make those wood cutting tools work even better in aluminum. You can spray it on, then blow it off with compressed air, and the residual left behind will be enough for what you're doing. Thanks. Brad. |
Good stuff dude!
Was by your house yesterday. Hurry up, we got gas to burn! |
Originally Posted by Twin O/B Sonic
(Post 4897701)
Good stuff dude!
Was by your house yesterday. Hurry up, we got gas to burn! |
Yesterday the planets aligned and there was someone at Wasserbeck racing.
Was in Prospect on a sales call when I saw a car in their driveway and figured I’d see if the door was open. Lucky for me it was and Ed Wasserbeck himself was there. Got a tour of the shop and a half hour history lesson on drag racing and motors and will be a lifelong memory! Now I have a wizard to do my machine work and only a half hour from home! Amazing capabilities, in what looks like a tiny building from the outside is huge on the inside and jampacked full of machinery including a CNC! Even have a set up to test injectors for top fuel cars! Ed’s son makes these intakes on the CNC for the Cummins diesel’s at Firepunk racing. Told Ed I’m coming back w/a 6 pack, we’re locking the door and taking the phone off the hook so I can hear more history! https://cimg9.ibsrv.net/gimg/www.off...01aa516f0.jpeg https://cimg6.ibsrv.net/gimg/www.off...5e66fea3b.jpeg https://cimg9.ibsrv.net/gimg/www.off...cabe7ce45.jpeg |
Originally Posted by Twin O/B Sonic
(Post 4898422)
Yesterday the planets aligned and there was someone at Wasserbeck racing.
Was in Prospect on a sales call when I saw a car in their driveway and figured I’d see if the door was open. Lucky for me it was and Ed Wasserbeck himself was there. Got a tour of the shop and a half hour history lesson on drag racing and motors and will be a lifelong memory! Now I have a wizard to do my machine work and only a half hour from home! Amazing capabilities, in what looks like a tiny building from the outside is huge on the inside and jampacked full of machinery including a CNC! Even have a set up to test injectors for top fuel cars! Ed’s son makes these intakes on the CNC for the Cummins diesel’s at Firepunk racing. Told Ed I’m coming back w/a 6 pack, we’re locking the door and taking the phone off the hook so I can hear more history! https://cimg9.ibsrv.net/gimg/www.off...01aa516f0.jpeg https://cimg6.ibsrv.net/gimg/www.off...5e66fea3b.jpeg https://cimg9.ibsrv.net/gimg/www.off...cabe7ce45.jpeg Yea Ed's a cool dude, and does great work. |
| All times are GMT -5. The time now is 09:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.