making nidacore sandwhich
 

so 2 pieces nidacore 78 x 3 inches,
i used 2 pieces of 1708, first layer went mat side down on nidacore ( nida took a little resin as well )
second piece of 1708 went mat side up
then second piece of nidacore went down
everything was lined up along a straight edge, stood up and clamped between a couple of 2x4's

anyone think i should've done something different?
the other thing is i don't know if the nida has any strength in the upright position ( like a beam ) if not i have an idea on the back burner
[ATTACH=CONFIG]562592[/ATTACH][ATTACH=CONFIG]562593[/ATTACH][ATTACH=CONFIG]562594[/ATTACH][ATTACH=CONFIG]562595[/ATTACH]

thanks for any input.

then sometimes pics come up as pics and sometimes the come up as attachments, how do ya make them always come up as pics ?

[ATTACH=CONFIG]562596[/ATTACH][ATTACH=CONFIG]562597[/ATTACH][ATTACH=CONFIG]562598[/ATTACH][ATTACH=CONFIG]562599[/ATTACH]

i think i got it
https://www.youtube.com/watch?v=LSr_3E7VWmo

sandwich, not sandwhich,
https://www.youtube.com/watch?v=FaZSW6zWJbE

Are you starting my engine cover. Awesome. Can't wait to get it.

thats not the hatch yet
but i got all the nida for the last 3 things i have to make, 6 sheets, 2 scored,
picked them up friday
[ATTACH=CONFIG]562603[/ATTACH][ATTACH=CONFIG]562604[/ATTACH]

Soon. Set a finish date. I'll trailer down to do some boating

always welcome to come down

finish date !, i gotta get to the tunnel before i can see the light at the end of it

and then theres the engine i still need