496 raw water pump scoring?
#1
Registered
Thread Starter
496 raw water pump scoring?
This is a new to me boat and not knowing the exact history of it decided to replace the impellor. Little did I know how much of a pain in ass this was, feel like I took half the boat apart to get there. The impeller actually looks to be in good shape, however I think the housing has the dreaded scoring. What are my options now? Replace with a stainless kit for $500, or is there a decent repair it that is worth it? Hate to send the money for a new one, but also with as much as this is a pain in thr butt I don't want to be redoing it again right away.
Last edited by bdbwtie; 05-13-2023 at 05:20 PM. Reason: Added pic
#2
Registered
iTrader: (1)
Here, i spelled it all out to cheaply use merc’s repair parts but you have to join that forum to see.
Boatfreaks
Boatfreaks
The following users liked this post:
92nsx (05-15-2023)
#3
Registered
Originally Posted by ;4867626
This is a new to me boat and not knowing the exact history of it decided to replace the impellor. Little did I know how much of a pain in ass this was, feel like I took half the boat apart to get there. The impeller actually looks to be in good shape, however I think the housing has the dreaded scoring. What are my options now? Replace with a stainless kit for $500, or is there a decent repair it that is worth it? Hate to send the money for a new one, but also with as much as this is a pain in thr butt I don't want to be redoing it again right away.
Yup. That’s what mine looked like. Only my impeller had one foot in the grave.
I ended up putting a complete new Merc pump on mine. Cost me a grand, P&L, to have it done, because I didn’t want to stand on my head to do it.
Thanks. Brad.
#4
Registered
iTrader: (1)
Merc makes wear plates and an impellar to match those plates. See my link. Cheap and effective.
#5
Registered
Thread Starter
#6
Registered
Here, i spelled it all out to cheaply use merc’s repair parts but you have to join that forum to see.
Boatfreaks
Boatfreaks
Could you be troubled to copy and paste?
Thanks. Brad.
#7
Registered
iTrader: (1)
Nope.
It is over a page or so. Not one post.
Thus why i haven’t copied and pasted. Not that easy.
i spent way much more time/effort at the time to come up with that info, so if someone can’t spend a few minutes to gain access to it, oh well. Their laziness, not mine. :thumbs
Me comprendo ? :wink
It is over a page or so. Not one post.
Thus why i haven’t copied and pasted. Not that easy.
i spent way much more time/effort at the time to come up with that info, so if someone can’t spend a few minutes to gain access to it, oh well. Their laziness, not mine. :thumbs
Me comprendo ? :wink
Last edited by SB; 05-14-2023 at 04:18 PM.
The following users liked this post:
92nsx (05-15-2023)
#8
Registered
iTrader: (1)
Ps: i know you aren’t lazy. You help peeps too. Just every time i post the link to help, i get same response. Doh.