Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   TRS install tool? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/181036-trs-install-tool.html)

stageharbor 03-02-2008 07:54 AM
use the HD cross and bearing part # 75832t 1

J-Bonz 03-02-2008 12:04 PM
Never really had a problem hanging them other than my back for the following year.

jhiguy377 03-02-2008 03:20 PM
thanks for the number stage - jeff

Boomer35 03-02-2008 04:42 PM
masking tape works great and is no harm,

Panther 03-03-2008 03:04 PM
Originally Posted by MOBILEMERCMAN (Post 2466278)
I always laugh when I pull a drive off and find masking tape all gummed up with grease in where it should not be. Get Merc cross bearings and do not trust auto parts stuff.
Good times!!!!:cool-smiley-026:

How about those OMC drives with the rubber ring in the bellows that the Ujoints didn't fit thru... Who the hell designed that?? I'd have to grease up the ujoints on the outside and spin them with a friggin 1 ft long flat head screw driver while pushing the drive in.... :hitfan:

J-Bonz 03-03-2008 08:11 PM
Originally Posted by Panther (Post 2469555)
Good times!!!!:cool-smiley-026:

How about those OMC drives with the rubber ring in the bellows that the Ujoints didn't fit thru... Who the hell designed that?? I'd have to grease up the ujoints on the outside and spin them with a friggin 1 ft long flat head screw driver while pushing the drive in.... :hitfan:
WOW, I am not the only one thats been there, done that. Add cold weather for more fun.
Jr.


All times are GMT -5. The time now is 10:13 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.