Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   throttel polish (https://www.offshoreonly.com/forums/do-yourself-boating-budget/183898-throttel-polish.html)

THEKID29FEVER 04-06-2008 08:51 PM

throttel polish
 
Has anyone ever polished their throttle out mine is white any advice will help

justfloatn 04-07-2008 10:51 AM

Yes:D
See trim switch / Throttle control thread.
Mine was black. I stripped the paint with BIX stripper from Home Depot. The metal is a little rough when done. I cut the bulk of the metal with an angle air grinder and a scotch type disc, then sanded with 600 wet and finally polished it. It is stainless so it takes alot more time to polish verses aluminum. But it looks good when done.

THEKID29FEVER 04-07-2008 07:41 PM

THANKS about how many hours did it take?


All times are GMT -5. The time now is 05:13 AM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.