Offshoreonly.com - Drive motor

Page 1 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Drive motor (https://www.offshoreonly.com/forums/do-yourself-boating-budget/193438-drive-motor.html)

jrocket

08-18-2008 04:57 PM

Drive motor

Bravo 1 trim drive runs but I have no movement, stuck in the up position. . which way to go which way to go

RBeyer

08-18-2008 06:26 PM

Quote:

Originally Posted by jrocket (Post 2656593)

Bravo 1 trim drive runs but I have no movement, stuck in the up position. . which way to go which way to go

It should be the down trim solenoid. I'm not sure of the colors of the wires they are dirrerent than the up side making it easy to find.
Maybe someone can help. It could also be the switch.

800XCR

08-18-2008 10:19 PM

Blue Sky - Green Grass

jrocket

08-20-2008 04:34 AM

somewhere to go! Thanks guys!!!

Warlock28SXT

08-20-2008 10:33 AM

Quote:

Originally Posted by jrocket (Post 2656593)

Bravo 1 trim drive runs but I have no movement, stuck in the up position. . which way to go which way to go

If the pump runs when you hit the down switch then it's not the solenoid. It could be your trim rams are frozen. It happened to my dads boat(Bravo1). Had to have the rams rebuilt. The kits are about $60 each. Just a thought.

redcorvetteman3

08-20-2008 11:11 AM

Did you have the hose's off???

lookinforboats

09-04-2008 08:12 PM

try someone heavy jumping on the drive while you hit drive down button - happens all the time

Griff

09-06-2008 02:32 PM

Quote:

Originally Posted by lookinforboats (Post 2674914)

try someone heavy jumping on the drive while you hit drive down button - happens all the time

:eek::eek:

tomas_wallin

09-08-2008 03:25 PM

Quote:

Originally Posted by lookinforboats (Post 2674914)

try someone heavy jumping on the drive while you hit drive down button - happens all the time

That sounds a bit too violent...:eek:

Have someone kick the drive downwards when you hit the buttom! If the trim motor runs ofcourse! If the drive has been sitting in the far most up position for some time it sometimes gets stuck and needs some help to break loose.

CPPerformance

09-08-2008 04:36 PM

solenoid

Quote:

Originally Posted by jrocket (Post 2656593)

Bravo 1 trim drive runs but I have no movement, stuck in the up position. . which way to go which way to go

Sounds like the solenoid, thats where I would start. Look here.
:drink:

All times are GMT -5. The time now is 08:57 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page