![]() |
Exhaust Questions
I am wanting to make a little more noise with my boat. I am currently running twin 454s with the exhaust exiting out of the TRS drives. Any suggestions on how to put through the hulls on? do I need to worry about reversion the motors are only 330hp? This is on a 30 year old boat so it might not be worth doing. Is this a do it youself project or do I need to have someone else do it?
|
Try Corsa Marine Exhaust and have a look around. I'd suggest the captains call, for those special quite moments.
It can be a DIY job, if you are not afraid of drilling into your transom... In your case 4 large holes. |
Find a used set. With the TRS set up you should have plenty of room. You can do this. Just take your time, lay out the holes properly and start drilling. Be sure to either seal the holes with resin or epoxy.
If I can be of assistance, email me: [email protected] Kirk |
Originally Posted by Elite Marine
(Post 2829769)
Find a used set. With the TRS set up you should have plenty of room. You can do this. Just take your time, lay out the holes properly and start drilling. Be sure to either seal the holes with resin or epoxy.
If I can be of assistance, email me: [email protected] Kirk |
| All times are GMT -5. The time now is 02:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.