My Hynautic steering problems......
 

I have a Hynautic system. Helm, pressurized reservoir, pressure relief valve, and dual cylinders. Im trying to bleed the air out of it. When I got it all it did was turn right and spin freely left. With 2 cylinders, one is supposed to go out at the same time the other cylinder is going in. I have gotten it to where one comes out but the other doesn't start to go in until the one is all the way out. Anyone know what im doing wrong? Is there any shops in Florida preferably on the east coast that you would recommend? Im really losing my patients. Any help would be appreciated. Ray

they need to be connected to the drive. It sounds like your bleeding them while they are hanging loose.

What he said,,,,unless u got them hooked up wrong ,,,which i can't imagine.:party-smiley-004:

Hummmm.
 

I will put the drive back on and try it again. Thanks! Ray

Woohoo!!!
 

I put the drive back on and hooked the steering cylinders to it. My steering works perfect! I have about 3.75 turns lock to lock. No play at all. Life is good! Thanks! Ray:drink: