Offshoreonly.com - Gen 5 vs. 6

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Gen 5 vs. 6 (https://www.offshoreonly.com/forums/do-yourself-boating-budget/211254-gen-5-vs-6-a.html)

BowenCT

06-25-2009 10:31 AM

Quote:

Originally Posted by PatriYacht (Post 2891657)

Gen 5's were from 1994-1995 but I wouldn't be suprised if a few made there way into 1996 boats. The timing cover is a dead givaway.

My boat came from the factory with Gen. Vs. It's a '92.

Ghostrider

06-25-2009 04:26 PM

Gen V was actually made from 1991 - 1996 but they all sucked so there aren't as many around as there are Mk IV and Gen VI's

ezstriper

06-26-2009 06:22 AM

the "marine" gen IV V's did not have a fuel pump boss, but the GM crate perf engines do on gen VI's

DONZI

06-27-2009 05:54 AM

Casting #'s with info here also-
http://www.mortec.com/bbc.htm

donzi-joey

06-27-2009 10:55 AM

I have a 502 out of my 99 26ZX and it has a mechanical fuel pump on it.

mecelec

06-28-2009 09:09 PM

I am currently rebuilding my motor. I have replaced the Gen V block with a Gen VI. I have used the rotating assembly from the Gen V. Is there any problem in this?

All times are GMT -5. The time now is 07:39 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page