|
those sheets are not meant to have screws thru them, it will cause them to crack and break...try using trim around the edges and 2 sided tape in the middle...Rob
|
Originally Posted by ezstriper
(Post 3054717)
those sheets are not meant to have screws thru them, it will cause them to crack and break...try using trim around the edges and 2 sided tape in the middle...Rob
When i bought mine at a local plastic supply place ther had "special" drill bit's that they recommended to use to drill thru the plastic and nit damage it. I drilled it with no problems at all... The key is to drill very slow with very light pressure with a piece of wood behind it to keep from cracking it.:coolcowboy: |
Originally Posted by Strip Poker 388
(Post 3054643)
I'm paying 140 for a sheet 40 to cut to my template and I get the droppings,so far I'm out 540 and 3 broke mirrors:mad:Ive got to find a better way to attach it,I have screw heads that hold the hatch pad on, maybe a spacer behind the glass so it want crack tighten down on the cover, the 3M tape is working on the other glass.just have to cover the screw heads and the sides it needs a backing to protect the silver.
|
1 Attachment(s)
automotive mirror decal,works great
|
Originally Posted by boatnt
(Post 3071995)
automotive mirror decal,works great
|
Originally Posted by Strip Poker 388
(Post 3072173)
Looks good, were do ya get the mirror?
|
Come on...ya gotta be more specific!!!
Is it simply a decal...peel and stick?? That would be way too easy...good idea!!! |
Originally Posted by verbi69
(Post 3073021)
Come on...ya gotta be more specific!!!
Is it simply a decal...peel and stick?? That would be way too easy...good idea!!! |
where did you get it? have a vendor name, contact?
|
Yeah need more info. Searching ebay not having much luck.
|
| All times are GMT -5. The time now is 05:21 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.