Offshoreonly.com
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Bravo 1 stuck in gear.. Videos attached.. HELP (https://www.offshoreonly.com/forums/do-yourself-boating-budget/229127-bravo-1-stuck-gear-videos-attached-help.html)

mike tkach 04-28-2010 10:05 AM
Originally Posted by kyboy1020 (Post 3097445)
Been great help... I will put a linkage measured on it before this weekend to make sure all is well. I also ordered the bravo 1 manual for future issues. Hopefully I will be tearing up the waters this weekend :)
KYBOY,on your way to the water,FILL THEM GAS TANKS,lol,then enjoy the boatride.:lolhit:

FuelinAround 04-28-2010 03:27 PM
Yeh.... being a fuel distributor and running out of gas....you can only imagine thos phone calls and jokes that have followed

John the Drive Man 04-29-2010 08:04 AM
Drive upper needs to come apart the clutch is stuck in forward. Seen this happen many times. Give me a call at
954 237 0332. Ask for John

teamsynergy 04-29-2010 08:35 AM
John, he already has this fixed... I think he is good to go.

kubcat 12-10-2018 06:19 AM
I know this is a really old thread but I took my boat out, went into reverse and I can’t get the port gearbox out of reverse regardless of the motor running or not.

It is definately not worn, the Bravo 1 is less than 5 hours old and they have been very easy hours.

Any suggestions, I just want to go boating?

Knot 4 Me 12-10-2018 11:52 AM
Originally Posted by kubcat (Post 4662992)
I know this is a really old thread but I took my boat out, went into reverse and I can’t get the port gearbox out of reverse regardless of the motor running or not.

It is definately not worn, the Bravo 1 is less than 5 hours old and they have been very easy hours.

Any suggestions, I just want to go boating?
You may have a simple cable issue. With the hatch open, have someone work the port shift lever and see if the cable from the helm to the shift bracket is indeed moving the cable from the shift bracket to the drive. If something appears amiss there see if you can shift the drive out of gear by hand manually at the shift bracket.

kubcat 12-10-2018 03:25 PM
I have disconnected the cable from the shift bracket. The gear lever end works fine. The cable going into the drive is well and truly stuck.

Also tried rocking the propellor backwards and forwards while trying to shift. No luck either.


QUOTE=Knot 4 Me;4663039]You may have a simple cable issue. With the hatch open, have someone work the port shift lever and see if the cable from the helm to the shift bracket is indeed moving the cable from the shift bracket to the drive. If something appears amiss there see if you can shift the drive out of gear by hand manually at the shift bracket.[/QUOTE]

Tinkerer 12-10-2018 07:25 PM
pull the drive

JaayTeee 12-10-2018 07:55 PM
When the engine is running and you attempt to shift it out of gear, do you feel the shifter pulse/ ratchet?

kubcat 12-10-2018 08:33 PM
No, don’t feel anything. Just stuck with engine running or not.

Originally Posted by JaayTeee (Post 4663112)
When the engine is running and you attempt to shift it out of gear, do you feel the shifter pulse/ ratchet?


All times are GMT -5. The time now is 12:06 PM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.