Offshoreonly.com - 242ls fuel sending unit

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - 242ls fuel sending unit (https://www.offshoreonly.com/forums/do-yourself-boating-budget/237855-242ls-fuel-sending-unit.html)

rjh12904

08-29-2010 08:43 AM

242ls fuel sending unit

my sending unit is no good, it was bouncing from e- 3/4 tank while not moving then I tried checking for a good connection and I fixed it so good it just stays on e my question is do i have to pull up the center floor section to pull it out? I have an access hole but it is off to the side of access. Is there anything I need to do ,other then remove screws, when pulling it and reinstalling it?

rjh12904

08-29-2010 08:44 AM

the floor section

jmrapp

08-30-2010 08:45 AM

I have never had mine up. I can reach mine leaning into the bilge. I would try that.

jmrapp

08-30-2010 08:45 AM

I would try to reach it from the bilge if you can.

endeavour32

08-30-2010 09:14 AM

You can get it out without removing the floor... Just remove the screws and pull it out. If you have a 242 SS you may have to pull the floor panel but the LS will come out with everything in place!

rjh12904

08-30-2010 08:41 PM

I pulled the floor it was easy I just didn't know if I would be opening a can of worms

All times are GMT -5. The time now is 04:31 PM.