250 B&M Blower OIL Change?
How do you drain the oil in a 250 B&M Blower?
It looks like I have to take the entire blower off and turn it upside down. That's a stupid design if that is what has to be done. Also, what type of oil do you put in it? |
Originally Posted by UrbanDisturbance
(Post 3241801)
How do you drain the oil in a 250 B&M Blower?
It looks like I have to take the entire blower off and turn it upside down. That's a stupid design if that is what has to be done. Also, what type of oil do you put in it? |
Originally Posted by AO31
(Post 3241950)
The design is flawed for sure. What works for me is a hand pump like the one used for gear lube. Flatten the tube a little and extract the old oil through the fill hole.
I only have around 45 hours on the blowers. I think it is time to change the oil, but not sure. What type of oil? |
Originally Posted by UrbanDisturbance
(Post 3241969)
That Su*ks!
I only have around 45 hours on the blowers. I think it is time to change the oil, but not sure. What type of oil? |
If they are like my 420's you want to take off the nose to drain oil and grease the coupler(usually wear out from lack of grease). I use merc spline grease on couplers and merc drive oil in blowers. :drink:
|
All times are GMT -5. The time now is 11:44 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.