Offshoreonly.com - Riser Gaskets: Blank, Restricted or Open?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Riser Gaskets: Blank, Restricted or Open? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/247512-riser-gaskets-blank-restricted-open.html)

I'CE	03-06-2011 03:43 AM

What is the position of the holes on the restricted gasket ? Is it port and starboard or bow to stern positioning that is open for water flow ?

f_inscreenname

03-06-2011 11:15 AM

Quote:

Originally Posted by I'CE (Post 3343340)

What is the position of the holes on the restricted gasket ? Is it port and starboard or bow to stern positioning that is open for water flow ?

They should only go on one way. I believe they are a bit longer then wider.

I'CE	03-13-2011 05:27 PM

correct on his, rectangle shape, was just asking if the holes are side to side or front to rear !

jmrapp

03-14-2011 03:11 PM

the restricted holes are front and rear.

I'CE	03-17-2011 09:38 PM

So he could open say the front hole and increase the cooling water flow overall. thanks

242LS

03-19-2011 11:51 AM

1 Attachment(s)

Quote:

Originally Posted by I'CE (Post 3349421)

correct on his, rectangle shape, was just asking if the holes are side to side or front to rear !

Looks like this (blocked holes are front/rear):

All times are GMT -5. The time now is 07:55 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page