Offshoreonly.com - Marinizing a 454 short block...

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Marinizing a 454 short block... (https://www.offshoreonly.com/forums/do-yourself-boating-budget/251093-marinizing-454-short-block.html)

87MagnumII

04-11-2011 10:33 AM

Your best bet is to take everything to a machine shop and have them swap your parts and do a refresh. I'm not trying to be an ass but if you are not confident in your ability to rebuild this thing paying somebody is your best option, it will save you time and money and grief down the road

jeffswav

04-12-2011 08:02 AM

Make sure you use the 30psi pressure valve on the side of the oil pan and remove the one in the middle. Be sure you are using a oil cooler and block adaptor.

vdriven

04-14-2011 06:38 PM

18' Mandella long deck. Scarab 300

Buy a how to Big Block Chevy Manuel, and do it step by step, Picture by picture, all the torque specs. and other info. that you will need should be in there. Good Luck.

jeffswav

04-15-2011 12:47 PM

Quote:

Originally Posted by jeffswav (Post 3374612)

Make sure you use the 30psi pressure valve on the side of the oil pan and remove the one in the middle. Be sure you are using a oil cooler and block adaptor.

Ok, it will not let me edit for some reason, it is the "oil filter pad" not the pan

Eliminator28

04-15-2011 04:29 PM

Quote:

Originally Posted by 87MagnumII (Post 3373787)

X2 :drink:

All times are GMT -5. The time now is 08:33 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page