trim tab wireing , Help please
 

Hi, so I bought a new combo switch set up , tabs / drives, out of a Baha from Kendor marine and am very stumped, these switches have 10 terminals total two are for illumination and the rest im stumped on how to wire it, heres the wireing and diagram for my existing switch, just having issues on the new switch
http://www.insta-trim.com/manual.html
i dont know what year the new switchs are from but theres 6 rockers total 3 for tabs/3 for drives mounted on a aluminum plate with carbon fiber look , it is from Kendor and new oem for baha boats, any help is greatly appreciated
Rich

just found that my new switch is manufactured by M&G Electronics if that helps any

Just my 2 cents, but I'm thinking Kendor marine or M&G Electronics would be a great source for a wiring diagram since you're a paying customer. (If I knew how I'd tell you, but I not know!) good luck

thanks, i might call them, didnt think they would have a diagram seeing that Kendor is a surplus store, but i guess they might be of help

the center one of your switches moves both tabs / drives together...so just bridge it in from both sides !

Post a picture of the terminals on the new swith, I will see if I can help

BAM! There ya go...:drink::drink::drink:

thanks as soon as i get time on Friday ill post a pic, thanks for the replys

thanks for the replies, i ended up modifying the plate and mounted old switch in the new panel, i think it looks good, plus the tab rockers are a different feel so at night or if im in rough water they feel different so less chance of hitting wrong switch since they are all in one cluster