6.2 IAC Motor
 

I have an 03 6.2, is there any cross reference in the auto world for the Iac or do I have to get one from Mercury.

autozone AL25 or something like that. $25

Found it
 

Found some, pass along the info, these fit 01 to 03 Ford Windstar with 3.8 v6. Get two for the price of one from mercury.
Duralast from Autozone #TV278
Standard # AC423
Motorcraft # CX1766
BWD # 50558 Oreilly carries

Be sure to compare them carefully. I bought a ford iac, and found the connector was different and it was turned 180*. No way it could be used even with the right connector. I have 496 Mag HO's.

I did, have it installed already. Pictures of it in link.
http://www.autozone.com/autozone/cat...2/TV278/image/

Yup, I compared numbers, i had gotten a different one. I think the motorcraft # was 1768.

I havent had good luck grossing Merc part numbers but I have had some success with crossing Quick Sliver or Sierra part numbers. I usually start with Google and find the Merc number and work backwards towards NAPA. This holds true for many of the bolt on parts. Good luck.

It's a Delphi CV10103 made for a 2002 Ford Windstar. I bought just it Amazon Prime for $47.

Also
http://www.rockauto.com/catalog/rafr...&parttype=6072

or
https://www.google.com/webhp?sourcei...w=1920&bih=995

what exactly does this IAC Motor do? I have HP 500 EFI's, will those numbers above for mine too?

Helps control the idle by adjusting air flow through the IAC pintle. Effectively it has an air inlet and needle valve that is continuously driven open or closed either allowing more or less air into the manifold to stabilize idle on EFI motors.

http://www.offshoreonly.com/gallery/...e=19168&size=1

Thank you very much for that.