Offshoreonly.com - oil pan decisions

Page 1 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - oil pan decisions (https://www.offshoreonly.com/forums/do-yourself-boating-budget/265139-oil-pan-decisions.html)

zeke	11-02-2011 07:41 PM

oil pan decisions

Im building a gen4 496 this winter with a procharger. ive been searching for oil pans and cant find nothing i really like what does everyone go with and where from?
I was looking at http://aroilpans.com/Marine.html or stephs

vintage chromoly

11-02-2011 08:06 PM

canton with a crank scraper.

Advantage 575

11-02-2011 08:57 PM

Canton

snapmorgan

11-02-2011 10:56 PM

http://www.jegs.com/i/Hamburgers/497...rentProductId=

Nice pan for the money

fbc25el

11-03-2011 10:18 AM

Dan Olson!

lightning jet

11-03-2011 05:19 PM

Canton made in Ohio ,good stuff.

bwd	11-03-2011 05:51 PM

Who's that Armando guy? Was that offshore pan alum? I bought 2 Hardin 10 quarts this past spring. Don't anyone waste their $. The 1st one, the engine builder had to use a press to get the seal gland to fit the rear cap and it hit the oil pump too. Both pans hit oil adapters which in turn put quite a bit of oil in the bilge. The quality was much better when Gil made them.

zeke	11-04-2011 09:41 AM

Im not sure who he is i just googled marine oil pans hes 429 he said for a pan I didnt ask if its aluminum

offthefront

11-06-2011 05:29 PM

Quote:

Originally Posted by zeke (Post 3542708)

Im not sure who he is i just googled marine oil pans hes 429 he said for a pan I didnt ask if its aluminum

Armondo makes steel pans. Price includes the pickup too....m

zeke	11-07-2011 09:35 AM

does armondo build a nice pan?

All times are GMT -5. The time now is 04:22 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page