Aluminum Manifold
#1
Registered
Thread Starter
Join Date: Aug 2009
Location: Deerfield Beach, FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Aluminum Manifold
Is there some kind of an anode that I have to have, if I use a non-marine aluminum manifold? Think I read that somewhere.
Thanks!
Thanks!
#3
Registered
VIP Member
Join Date: Nov 2010
Location: Mount Laurel, NJ
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
I disagree. I had 420's that came with aluminum manifolds and I flushed them for 15 minutes avfter every use. In 3-4 years a pit formed underneath the thermostat and bore a hole to the point they leaked. I replaced them with manifolds that had a brass sleeve in the crossover.
#4
Registered
Join Date: Mar 2011
Location: Dover DE
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I disagree. I had 420's that came with aluminum manifolds and I flushed them for 15 minutes avfter every use. In 3-4 years a pit formed underneath the thermostat and bore a hole to the point they leaked. I replaced them with manifolds that had a brass sleeve in the crossover.