Offshoreonly.com - converting to full time straight exhaust (pic)

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - converting to full time straight exhaust (pic) (https://www.offshoreonly.com/forums/do-yourself-boating-budget/270799-converting-full-time-straight-exhaust-pic.html)

triple 300s

02-16-2012 12:49 PM

converting to full time straight exhaust (pic)

1 Attachment(s)

What does it take to do this? I want to delete the run going thru the transom assemblies.

302Sport

02-16-2012 01:00 PM

doesnt take much at all.....unbolt all of your tails from the headers, take off the y pipes that go to the assembly, then put the cover over the hole thats left. Now measure everything and send to cmi for some new tails.....

TRL505

02-16-2012 03:34 PM

Quote:

Originally Posted by 302Sport (Post 3619281)

And get ready to fork over about 5k-7k.....:lolhit::bunnydance::bunnydance::bunnydance ::eekdrop::whistle:

MCKILLOP

02-16-2012 03:55 PM

I don't think you can pull y pipes without also pulling the engines. But you can cap the y pipe if needed.

All times are GMT -5. The time now is 11:10 AM.