Here's the New 502! Looking for 625HP
04-01-2012 | 10:52 PM
#33
Thread Starter
Registered
Joined: Jul 2011
Posts: 126
Likes: 0
From: Pensacola FL
That's cool, I grew up in P'cola and have known the Musick's for a long time.
Definitely a nice rig & i'll be curious to hear what you get out of her with the right prop. I'd think upper 80's to low 90's should be feasible...? I have a buddy up here on Lake Norman that had a 27' Fountain with an 800hp+ blower motor and he says it gets real squirly around 90mph
We'll be in Destin for the Emerald Coast FPC run, but thinking about coming down for Memorial weekend or Blue Angels to visit my Mom and bring the boat. We'll have to hook up & run together if we do.
Definitely a nice rig & i'll be curious to hear what you get out of her with the right prop. I'd think upper 80's to low 90's should be feasible...? I have a buddy up here on Lake Norman that had a 27' Fountain with an 800hp+ blower motor and he says it gets real squirly around 90mph
We'll be in Destin for the Emerald Coast FPC run, but thinking about coming down for Memorial weekend or Blue Angels to visit my Mom and bring the boat. We'll have to hook up & run together if we do.
Skip M-Day in Pensacola, Hit Orange Beach.
I'm hoping for 80mph. I'd be happy with that. I'll have it in the water this coming weekend. I post my results.
04-02-2012 | 09:34 PM
#36
Thread Starter
Registered
Joined: Jul 2011
Posts: 126
Likes: 0
From: Pensacola FL
Update:
Worked all Day & Night on Friday & Saturday to get it in the water for Sunday. Found myself at a NO GO point. The CMI Headers needed a 5" Clamp, CMI sent me 4" ones, couldnt bolt up the tails at all. Couldnt even test run it, THAT SUCKED! Should have the clamps on Tuesday. I'll have it on the hose ASAP!!!!
Worked all Day & Night on Friday & Saturday to get it in the water for Sunday. Found myself at a NO GO point. The CMI Headers needed a 5" Clamp, CMI sent me 4" ones, couldnt bolt up the tails at all. Couldnt even test run it, THAT SUCKED! Should have the clamps on Tuesday. I'll have it on the hose ASAP!!!!
04-05-2012 | 10:53 AM
#37
Registered
Joined: Feb 2005
Posts: 4,400
Likes: 25
From: Michigan
Update:
Worked all Day & Night on Friday & Saturday to get it in the water for Sunday. Found myself at a NO GO point. The CMI Headers needed a 5" Clamp, CMI sent me 4" ones, couldnt bolt up the tails at all. Couldnt even test run it, THAT SUCKED! Should have the clamps on Tuesday. I'll have it on the hose ASAP!!!!
Worked all Day & Night on Friday & Saturday to get it in the water for Sunday. Found myself at a NO GO point. The CMI Headers needed a 5" Clamp, CMI sent me 4" ones, couldnt bolt up the tails at all. Couldnt even test run it, THAT SUCKED! Should have the clamps on Tuesday. I'll have it on the hose ASAP!!!!
