Offshoreonly.com
Page 5 of 6
« First
3
4
5
6
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   Engine Dynoed Today. (https://www.offshoreonly.com/forums/do-yourself-boating-budget/274200-engine-dynoed-today.html)

FIXX 09-16-2012 10:31 PM
fixx
 
Originally Posted by MILD THUNDER (Post 3777968)
Figured I'd update some of you. Engines have been running great. Been playing with props, got 88mph so far. Turning a 17x28 4 blade prop at 5600. Boost is 6lbs wot. AFR is like 10.5 at wot, so may pull a couple jet sizes. But overall a fun project. Not blistering speeds, but the hull is a 1990, non stepped, running thru SSM drives. If I had bravo's i'd probably be in the 90's. But I love the SSM drives.
If I had bravo's i'd probably be in the 90's
No you wouldn't..you would be on the trailer with broken drives..BTW thanx for the call when you were installing ..:whistle:

Car Biz 09-17-2012 05:45 PM
Originally Posted by MILD THUNDER (Post 3777968)
Figured I'd update some of you. Engines have been running great. Been playing with props, got 88mph so far. Turning a 17x28 4 blade prop at 5600. Boost is 6lbs wot. AFR is like 10.5 at wot, so may pull a couple jet sizes. But overall a fun project. Not blistering speeds, but the hull is a 1990, non stepped, running thru SSM drives. If I had bravo's i'd probably be in the 90's. But I love the SSM drives.
New project your motors in my boat:thankyouthankyou:

MILD THUNDER 09-17-2012 06:25 PM
Originally Posted by mrfixxall (Post 3778123)
No you wouldn't..you would be on the trailer with broken drives..BTW thanx for the call when you were installing ..:whistle:
True Dat. Especially on the big pond where Im airin it out quite a bit.

I think I did call you? Maybe not, I know we talked about it. I'll be sure next time to have you come by, this way I can show you the whole "Righty Tighty, lefty loosey" routine! :cartman:

MILD THUNDER 09-17-2012 06:27 PM
Originally Posted by Car Biz (Post 3778597)
New project your motors in my boat:thankyouthankyou:
For the right price, we can make that happen bud! I'll even throw in some "Mild Thunder" custom valve covers. :party-smiley-004:

MILD THUNDER 09-17-2012 07:28 PM
1 Attachment(s)
:whistle:

Rookie 09-17-2012 07:46 PM
Originally Posted by MILD THUNDER (Post 3778662)
:whistle:
That doesn't look like 88mph to me.....lol

Sounds mean! When are you going to put it up for the season?

FIXX 09-17-2012 07:54 PM
fixx
 
Originally Posted by MILD THUNDER (Post 3778612)
True Dat. Especially on the big pond where Im airin it out quite a bit.

I think I did call you? Maybe not, I know we talked about it. I'll be sure next time to have you come by, this way I can show you the whole "Righty Tighty, lefty loosey" routine! :cartman:
its all good,,im sure it will be by mikes again but putting some 1071's on it this time now that you have better rods..:duel:

MILD THUNDER 09-17-2012 07:58 PM
3 Attachment(s)
Originally Posted by Rookie (Post 3778687)
That doesn't look like 88mph to me.....lol

Sounds mean! When are you going to put it up for the season?
Probably soon. Weather isnt looking that great....

Those dry pipe stellings don't make alot of friends around the harbor lol.

MILD THUNDER 09-17-2012 08:06 PM
2 Attachment(s)
Originally Posted by mrfixxall (Post 3778695)
its all good,,im sure it will be by mikes again but putting some 1071's on it this time now that you have better rods..:duel:
NO! Stop Talking dirty. Mike has some 10-71's sitting in his shop, although I think he should just let me run these...

mike tkach 09-17-2012 09:31 PM
Originally Posted by mrfixxall (Post 3778123)
No you wouldn't..you would be on the trailer with broken drives..BTW thanx for the call when you were installing ..:whistle:
dont worry mike,il call you,or better yet,im in the shop way to much,come on over any time.


All times are GMT -5. The time now is 10:14 AM.
Page 5 of 6
« First
3
4
5
6
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.