smoked impeller on 525
#11
Thread Starter
Registered
Joined: Feb 2007
Posts: 86
Likes: 0
From: Chicago, Il
The boat finally went in yesturday, and it's running fine. I never could find all the parts, and I pulled everything apart, but the pressure on that side is the same as the other motor. I did the other motors impeller, although it was fine. Thanks for the help. I now know way more about the motors, and I also saw how I need to change the fuel pump oil every 25hrs with the motor oil.
#12
Registered
Joined: Apr 2008
Posts: 2,771
Likes: 1
From: Sudbury Ontario
The boat finally went in yesturday, and it's running fine. I never could find all the parts, and I pulled everything apart, but the pressure on that side is the same as the other motor. I did the other motors impeller, although it was fine. Thanks for the help. I now know way more about the motors, and I also saw how I need to change the fuel pump oil every 25hrs with the motor oil.
#14
Registered

Joined: Jul 2007
Posts: 3,648
Likes: 32
From: Oneida Lake NY
I find it easiest just to take the assembly off, only takes a few mins to get it off. This will let you inspect the sea pump and impleller, and makes changing the oil simple and effective. You can also remove the fuel pump from the hoising and replace the gasket, change oil, and inspect bearings.



