Offshoreonly.com - SBC Flywheel Question

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - SBC Flywheel Question (https://www.offshoreonly.com/forums/do-yourself-boating-budget/279930-sbc-flywheel-question.html)

Lennox60

07-03-2012 12:58 PM

SBC Flywheel Question

I am replacing the old (pre '86) Mercruiser SBC in my boat with a newer (Vortec) SBC. I need a 14" flywheel for a 1 piece rear main seal engine. Can anyone tell me if the '86 & newer flywheels used on a manual transmission automotive applications are the same? For example, would a flywheel from a '98 Chevy truck with a 350 fit?

Thanks,
Len

Mr Maine

07-03-2012 02:58 PM

Yes it will.

Lennox60

07-04-2012 08:21 AM

Thanks.

FIXX	07-04-2012 12:26 PM

fixx

+1,,just make sure you give a few good coats of paint so it dont rust and add weight to it..

All times are GMT -5. The time now is 02:36 AM.