Offshoreonly.com - 496 Alarm sending units location

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - 496 Alarm sending units location (https://www.offshoreonly.com/forums/do-yourself-boating-budget/284282-496-alarm-sending-units-location.html)

Redhook98

09-06-2012 08:27 AM

496 Alarm sending units location

Time to start working on the boat again. I noticed when I replaced all my gauges that the wire for the Overtemp/Oil Pressure/Drive Lube alarm was cut by a PO When I reconnected it, it alarmed right away. All conditions on the gauges and in Smartcraft are good. This tells me I have a bad idiot light sensor. Where are the idiot light sensors physically located on the 496? It is a Dec 2002 model. These are the only three sensors in serial for this alarm, right?

Thanks!

Redhook98

09-10-2012 08:16 AM

Nobody?

Secretformula

09-17-2012 10:55 AM

I also need to know where they are located on a 95 502 efi. Thanks

All times are GMT -5. The time now is 10:23 AM.