Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   525 EFI valve spring change (https://www.offshoreonly.com/forums/do-yourself-boating-budget/284320-525-efi-valve-spring-change.html)

PARADOX 09-07-2012 08:53 AM
On the 525's valves are a bigger issue then the springs. But. call Tom at Champion Racing Heads near Daytona. 386 446-4488. He just worked on my 525 heads and very reasonable. They will check the springs for specs and won't sell you stuff you don't nee. Tell him Peter sent you.

bonesmalon 09-07-2012 09:09 AM
Originally Posted by teamsynergy (Post 3771525)
According to Merc... the 525EFI doesn't need to be freshened till north of 450-500 hours... its the 500EFI that needs it north of 300 hours.

However, the P/N is PAC-TVS1631 for the 525EFI. You can also use Crane 99896 spring set @ 132# @ 1.906 seat and 414# open.
I'm getting the impression thanks to many of you that the 300 hr target is in fact the 500 and it's looking like "it ain't broke...."
Thanks for the many inputs! I'm gassed up and going

dra200832 09-20-2012 07:37 PM
Does this still apply for older models like 2000 hp500 or 97 525


All times are GMT -5. The time now is 04:39 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.