|
Originally Posted by FuelinAround
(Post 3783617)
I just got my drive stands in the mail today and the motors are next. I got rid of all my old engine stands when we moved so I need to get some new ones. I will be pulling the motors to redo the bilge and check the motors over. Motors are gen4 454's. Suggestions?
|
As for the rotating stands the cheapies get the job done, and you can add reinforcement if need be. My 420's chill out pretty nice on the shop floor with a bit of a lean when the offshore mounts are attached so that works well. For other projects and long term storage I just fab up my own with scraps and 4 swivel casters. Plus it makes you feel better when you make $hit yourself.
|
Originally Posted by 454captiva
(Post 3785417)
As for the rotating stands the cheapies get the job done, and you can add reinforcement if need be. My 420's chill out pretty nice on the shop floor with a bit of a lean when the offshore mounts are attached so that works well. For other projects and long term storage I just fab up my own with scraps and 4 swivel casters. Plus it makes you feel better when you make $hit yourself.
|
Here is a link to the Outdrive Jackstands "fuelinAround" purchased. Units in stock ready to ship.
http://www.offshoreonly.com/classifi...o20513-en.html |
| All times are GMT -5. The time now is 12:38 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.