Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   CMI header mounting hardware (https://www.offshoreonly.com/forums/do-yourself-boating-budget/286211-cmi-header-mounting-hardware.html)

Unlimited jd 10-12-2012 12:38 PM
A little high temp rtv holds the gasket right in place. If your motors are close together like mine are studs may prevent you from taking the headers on and off with the motors in the boat. Btw bolts are 1" not 1 1/2".


All times are GMT -5. The time now is 01:58 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.