![]() |
Originally Posted by stlliberator
(Post 3806916)
Ya I know it works fine, but I am thinking about a blower upgrade next spring and while the motor is out of the boat I might as well change it right?
fuel pump... http://www.cpperformance.com/p-13156...fuel-pump.aspx regulator... http://www.cpperformance.com/p-13163...regulator.aspx |
Originally Posted by stlliberator
(Post 3806916)
Ya I know it works fine, but I am thinking about a blower upgrade next spring and while the motor is out of the boat I might as well change it right?
|
i would recommend running power thru oil pressure switch controlling a power relay to feed electric pump, larger wires and takes load off primary control circuit. same setup as diesel truck lift pump. install momentary switch as primer to get fuel, you would splice into wire after oil pressure switch(OPS)
|
Originally Posted by pslonaker
(Post 3806935)
A blower? Thats paints a whole new picture. Forget what I said about the fuel pump. You will need this fuel pump and this regulator, and if you do go with a blower...go with a Blower Shop Blower and not that B&M or Weiand crap.
fuel pump... http://www.cpperformance.com/p-13156...fuel-pump.aspx regulator... http://www.cpperformance.com/p-13163...regulator.aspx As for the Weiand/B&M being crap, I will bet my a$$ nobody has produced and sold more superchargers than either one of those companies. B&M was making their own street superchargers back when Trans Am's and disco were cool. I've got a B&M 420 Megablowers making 805HP non intercooled under 7lbs of boost, on 468 Inch pump gas motors. Underdriven 7%. Running a Holley 6 Valve self regulated mechanical marine pump with 1/2'' ports, supplys the fuel just fine. BBCLIBERATOR, theres nothing wrong with the sea pump style fuel pump. When your ready to bolt a blower on, Keith Eickert makes a pump to fit it that will supply the fuel. And if thats not enough, CV products makes a even better pump for that. |
fixx
Originally Posted by MILD THUNDER
(Post 3807687)
For starters, he doesnt need a A1000 pump and boost referenced regulator to add a roots blower. :bong:
As for the Weiand/B&M being crap, I will bet my a$$ nobody has produced and sold more superchargers than either one of those companies. B&M was making their own street superchargers back when Trans Am's and disco were cool. I've got a B&M 420 Megablowers making 805HP non intercooled under 7lbs of boost, on 468 Inch pump gas motors. Underdriven 7%. Running a Holley 6 Valve self regulated mechanical marine pump with 1/2'' ports, supplys the fuel just fine. BBCLIBERATOR, theres nothing wrong with the sea pump style fuel pump. When your ready to bolt a blower on, Keith Eickert makes a pump to fit it that will supply the fuel. And if thats not enough, CV products makes a even better pump for that. BTW the :bong: Disco and trans am's are still cool:party-smiley-004: |
Originally Posted by mrfixxall
(Post 3807707)
:thankyouthankyou: amen brotha!!:daz:
BTW the :bong: Disco and trans am's are still cool:party-smiley-004: |
Originally Posted by mrfixxall
(Post 3807707)
:thankyouthankyou: amen brotha!!:daz:
BTW the :bong: Disco and trans am's are still cool:party-smiley-004: |
| All times are GMT -5. The time now is 07:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.