Where to send stock carb for rebuild and polish
 

My old 4 barrel needs to be rebuild and cleaned up. We don't have anyone locally that does much more than rebuilds, no polishing up. Anyone have any recommendations?

do you want it rebuilt or polished? Maybe both.

Holley sells shiny marine carbs.

I buy all my carb parts from these guys. Best prices around from what I seen.

They can rebuild it, and re-finish it. Or, supply you with one already done and exchange yours.

http://www.allcarbs.com/detail.php?p...ctgn=54&stt=15

AED performance carbs..... hands down will do whatever you like and they are amazing. Greg

+3 they did my carb and not one problem

AED out of Richmond,VA? I just have a factory carb that I want rebuilt and polished up...unless I can replace it with a Holley model for about the same money. No mods other than water pump delete on a 454 gen IV

Phone: 804-271-9107 AED call them

http://aedperformance.com/ just got mine 1050dom from them

I can do it for you if you if you want. I have 6 drivers in Owensboro every day, no need to ship. Might be just about as cheap and easy to just buy a new one though for a stock application.

Nickerson mine run sweet. He did two for me.

Send to Carburetor Shop in Ontario, California. They will make it look better than new!

I would see how much first,bet you could buy one for a little more.

I assume its a quadrajet?
http://www.jegs.com/p/JEGS-Performan...52437/10002/-1

Depending on the rebuild prices you find it may be worth considering a new Edelbrock marine carb- can catch them on fleabay for mid 200's.

quick fuel is a great carb, Made in bowling green, Ky. they have alot of features without a huge price tag. Easy to deal with and close to you. They were holley engineers that left when holley got bought. Plus they make marine specific carbs; aluminum bodies, billet metering blocks and stainless base plates, Teflon coated shafts. Which are a few features you need to keeping the carb nice in a marine application. Some tuners do not offer these as standard features and charge more. For the price and features they offer going to be hard to beat.

Whats it cost for rebuild and polish or shiny zinc coat?

2nd on Quick Fuel. I had a set on some 454's. Great guys and you can walk in and talk to them. They run all their carbs. Mine were as smooth as efi. Fair price for them. They are right off of the Natcher parkway, just off of Russellville road.