![]() |
Best place to buy rigging supplys
Where is the best place to buy this stuff? I need bilge pumps, cushion clamps, was thinking of putting in pop up bow and rear nav light.
Blower hoses, tab and trim cables, stuff like that. Don't want cheap junk but don't want to pay top dollar either. Thanks. |
I used to get a lot from boatfix.com but the website has been down for awhile so I think they closed up shop. Good luck finding cushion clamps reasonably priced.
Jamestown Distributors isn't too bad on prices, and they have a lot of quality stuff. Other than that try greatlakesskipper on ebay. http://stores.ebay.com/Great-Lakes-S...p2047675.l2563 |
Cheapest place I found for cushion clamps was at http://www.mcmaster.com/#cushion-clamps/=m8q78a
|
Originally Posted by Griff
(Post 3901772)
Cheapest place I found for cushion clamps was at http://www.mcmaster.com/#cushion-clamps/=m8q78a
|
Cool thanks,
I was thinking of putting a oil change system in so I can pull oil from the pan. Anybody have experience with those? |
Clamps, http://www.delcity.net/store/Loom-Cl...Steel/p_800833
Pop up Bow Light, ended up at KE Performance |
Originally Posted by Wildman_grafix
(Post 3901792)
Cool thanks,
I was thinking of putting a oil change system in so I can pull oil from the pan. Anybody have experience with those? |
Originally Posted by Wildman_grafix
(Post 3901792)
Cool thanks,
I was thinking of putting a oil change system in so I can pull oil from the pan. Anybody have experience with those? |
What brand do you have griff?
|
try wholesale marine, they carry a lot of good stuff. Ebay and amazon arent bad either once you know the part number. Often times I look through a parts finder, find what I need and then put the part number in ebay or amazon and find the same thing much cheaper.
Theres always BAM marine which I have used, but dont like to as they charges are rediculous for shipping, thing I paid 13 bucks once for a few screws and washers to get shipped. Also they are not customer service orientated, even states on their website that dont call asking what numbers or anything, pretty much need to know what you want before you go to them. But I do enjoy their free parts finder that I can use. |
defender marine in conn
|
We carry a number of these items if you don't find what you need give us a shout. We also have a brand new 2013 300plus page catalog that might come in handy for you.
|
Originally Posted by soldier4402
(Post 3908901)
try wholesale marine, they carry a lot of good stuff. Ebay and amazon arent bad either once you know the part number. Often times I look through a parts finder, find what I need and then put the part number in ebay or amazon and find the same thing much cheaper.
Theres always BAM marine which I have used, but dont like to as they charges are rediculous for shipping, thing I paid 13 bucks once for a few screws and washers to get shipped. Also they are not customer service orientated, even states on their website that dont call asking what numbers or anything, pretty much need to know what you want before you go to them. But I do enjoy their free parts finder that I can use. |
Originally Posted by bonesmalon
(Post 3909179)
They're not alone...Monster Marine just charged me almost $14 to ship two 2 inch water pressure gauges!
|
Its pretty standard to upcharge for shipping, just like expenses no one bills without a charge.
But to charge you $15 for a $5 dollar ship is nuts. Thanks for the leads, hopefully this coming weekend I'll get time to start looking and ordering some parts. May even get the boat done by November.:lolhit: |
Originally Posted by Wildman_grafix
(Post 3910363)
Its pretty standard to upcharge for shipping, just like expenses no one bills without a charge.
But to charge you $15 for a $5 dollar ship is nuts. Thanks for the leads, hopefully this coming weekend I'll get time to start looking and ordering some parts. May even get the boat done by November.:lolhit: |
Guys, let me speak up about shipping. I think most of us in this industry are in the same position.
In general the US postal service is not an option. If we just throw the parts in an envelope and send regular mail there is no tracking, no insurance and no proof of delivery. So after we tried that a few times and had to replace “Lost” shipments at our expense we decided no more parts in envelopes sent regular mail. Priority mail is a step up, but after you add insurance it is not that cheap, about $8.25 to ship 1 pound. Why we don’t use Priority Mail: • If they do lose it collecting on the insurance is a full time job • Tracking is limited • We have to process the shipment manually • Our postman picks up at noon, so it is really hard to get stuff shipped the same day Express mail costs more than UPS. So we ship via UPS – and yes we do add a handling charge to small orders. If you go to the UPS web site you will see that the cheapest rate is in the $10-15 range for a residential delivery. For example 1 pound from here to Chicago is $13.19. There is no such thing as a $5 shipping cost with UPS. We don’t love UPS but in general they do a good job. Why we use UPS • Our web site can do a pretty good job of calculating the shipping costs • We ship a lot of packages - our UPS shipping is integrated with our order system so it is automatic at this end • Even though it is a pain we can actually collect from UPS if they lose or damage something • Our daily pickup is at the end of the day – so we can get stuff out the same day I wish there was a better, less expensive way to ship, I am open to suggestions. |
you gave us all the reasons for charging us more for shipping, but no incentive to buy from you. I mean 13.50 for an O-ring for a 500 EFI plenum 25-805732
|
Is $13.50 a lot for an O ring? Yes it sure sounds like it.
But we don't make the parts or set the prices. Everything we sell on our site is genuine Mercury and that is what they charge for it. The incentive to buy from us is that if you order it today, it will ship today - we have them on the shelf. And if you have a technical question we can answer it. |
[QUOTE=Mbam; And if you have a technical question we can answer it.[/QUOTE]
What size eaton/char-Lynn helm is needed for twin #6 drives? I've looked everywhere and can't find anything. I need one but can't seem to get a straight answer on what part number to order the correct one. Thanks VV |
How many turns do you want lock to lock?
160 CC's will give you 3 turns |
Originally Posted by Mbam
(Post 3910393)
Guys, let me speak up about shipping. I think most of us in this industry are in the same position.
In general the US postal service is not an option. If we just throw the parts in an envelope and send regular mail there is no tracking, no insurance and no proof of delivery. So after we tried that a few times and had to replace “Lost” shipments at our expense we decided no more parts in envelopes sent regular mail. Priority mail is a step up, but after you add insurance it is not that cheap, about $8.25 to ship 1 pound. Why we don’t use Priority Mail: • If they do lose it collecting on the insurance is a full time job • Tracking is limited • We have to process the shipment manually • Our postman picks up at noon, so it is really hard to get stuff shipped the same day Express mail costs more than UPS. So we ship via UPS – and yes we do add a handling charge to small orders. If you go to the UPS web site you will see that the cheapest rate is in the $10-15 range for a residential delivery. For example 1 pound from here to Chicago is $13.19. There is no such thing as a $5 shipping cost with UPS. We don’t love UPS but in general they do a good job. Why we use UPS • Our web site can do a pretty good job of calculating the shipping costs • We ship a lot of packages - our UPS shipping is integrated with our order system so it is automatic at this end • Even though it is a pain we can actually collect from UPS if they lose or damage something • Our daily pickup is at the end of the day – so we can get stuff out the same day I wish there was a better, less expensive way to ship, I am open to suggestions. |
Originally Posted by bonesmalon
(Post 3909179)
They're not alone...Monster Marine just charged me almost $14 to ship two 2 inch water pressure gauges!
I have some stuff that wasn`t what I expected and with return shipping and their restocking fee I might as well just stick it up my ass... no lube. An internet based store that charges you if its not as expected.... cause we can all tell from a picture on the web if thats EXACTLY what we need right? They didn`t even bother to reply when I asked twice for RMA Number. So we boaters all get jacked cause well we`re boaters and we must be able to afford it :rolleyes: For example 1 pound from here to Chicago is $13.19. There is no such thing as a $5 shipping cost with UPS. FedEx First Overnight® 8:00 AM Tue Apr 23,2013 85.96 FedEx Priority Overnight® 10:30 AM Tue Apr 23,2013 46.80 FedEx Standard Overnight® 3:00 PM Tue Apr 23,2013 42.29 FedEx 2Day® A.M. 10:30 AM Wed Apr 24,2013 21.20 FedEx 2Day® 4:30 PM Wed Apr 24,2013 18.44 FedEx Express Saver® 4:30 PM Thu Apr 25,2013 13.32 FedEx Ground® (3 Business Days) 6.92 I shipped an XR upper to Arizona for $62 |
| All times are GMT -5. The time now is 06:52 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.