Offshoreonly.com - 496 Mag HO water in the cylinders. How?

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - 496 Mag HO water in the cylinders. How? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/298577-496-mag-ho-water-cylinders-how.html)

Knot 4 Me

06-26-2013 09:35 AM

Quote:

Originally Posted by boatnt (Post 3949366)

what ever you do,,replace the exhaust tips with ones that have internal flappers...

+1. Buddy had a 2000 Dominator with the angle-cut Corsa tips with internal stainless flappers. No external rubber boots. Took a lot of waves into the transom on anchor at LOTO and never had a problem with getting water in the motors.

38fountained

06-26-2013 09:18 PM

Just had same happen to me .... Still have not figured it out. Aft exhaust valve full of water after engine ran fine... Could not turn...

All times are GMT -5. The time now is 04:15 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page