Offshoreonly.com - 496 smartcraft wiring harness issue?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - 496 smartcraft wiring harness issue? (https://www.offshoreonly.com/forums/do-yourself-boating-budget/307270-496-smartcraft-wiring-harness-issue.html)

fastestonehere

01-10-2014 06:51 PM

496 smartcraft wiring harness issue?

I have bought 3 rebuildable 496 motors complete from a ski boat with I/O's. Are there different wire harness for inboard motor than I/O's. And can I use these harness without the out drive connections. (Does the ECU care about the connection) I am hopping to use these unless I need to change.

fastestonehere

01-14-2014 07:03 AM

Well I found out I have 3 different I/O wire harnesses. #1 has a 10 pin connection. #2 has a 14 pin connector.
And #3 has both a 10 pin and a 14 pin. So I assume I can use either? Any help.

tazdevil

01-14-2014 06:21 PM

stay with the 2 harnesses that have 14 pins iit will make it easier

All times are GMT -5. The time now is 08:45 PM.