Offshoreonly.com - Issue with no crank

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Issue with no crank (https://www.offshoreonly.com/forums/do-yourself-boating-budget/319976-issue-no-crank.html)

Full Force

11-09-2014 07:55 AM

Quote:

Originally Posted by 353Formula (Post 4216360)

Now all after the test I tried to crank engine and it cranks don't know?

Sounds like loose connection or a solenoid going slowly... Make sure all grounds are good and run one between engines also.. If there isn't one there make one #4 wire between them

353Formula

11-09-2014 08:06 AM

Quote:

Originally Posted by Full Force (Post 4216370)

Gotta check in crank position

I did check in crank postion was nothing there now engine starts and runs shut off and restarted 10 times no issue now don't know I will be checking why
Thanks for the advice thou

Full Force

11-09-2014 08:21 AM

Sounds like iffy grounding I had issues like that would have nothing one day then be fine all summer.... I did all new wiring and grounds never had issues again grounding is a huge deal in boats

mike tkach

11-09-2014 08:58 AM

replace the slave solonoid,they commonly go bad.

Jonesyfxr

11-09-2014 09:08 AM

It could also be a bad spot on the starter motor commutator.

boatnt

11-09-2014 01:47 PM

neutral safety switch on shifter??

offthefront

11-09-2014 04:19 PM

Quote:

Originally Posted by boatnt (Post 4216561)

neutral safety switch on shifter??

353Formula

11-09-2014 05:45 PM

Thanks for all the replies it ended up being starter slave solenoid

Full Force

11-09-2014 06:16 PM

Usually is lol

All times are GMT -5. The time now is 08:34 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page