Offshoreonly.com - Raise the idle on a 5.7 mpi

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Raise the idle on a 5.7 mpi (https://www.offshoreonly.com/forums/do-yourself-boating-budget/329660-raise-idle-5-7-mpi.html)

SB	08-16-2015 08:44 PM

There;s a few that can reprogram the 555. I believe Dustin Whipple is one. Can't quickly the remember the other(s)

BUP	08-17-2015 10:31 AM

You better put up a pic of your ECM because crusader nor Indmar nor BARR ever used ECM or PCM 555 (Motorola) never.. You said that you installed a crusader / pcm bobtail engine package. If I recall that package should have came with a ECM already installed. Is that correct or was Mercruiser parts installed to fully dress the crusader package as it did not have an ECM ?

Crusader used MEFI. just saying

inlinepwr

08-17-2015 11:30 AM

[IMG]http://i242.photobucket.com/albums/f...707_202011.jpg[/IMG][IMG]http://i242.photobucket.com/albums/f...707_202207.jpg[/IMG]
Not the best pics but it's all I have on my phone.
How could I convert these risers to dry? Would they have to be sent back to stainless marine?

All times are GMT -5. The time now is 10:50 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page