![]() |
[QUOTE=TxHawk;4488643
Take a hard look at the fuel system from the tank to the injectors[/QUOTE] Really good advice here and often overlooked. You will need at bare minimum 3/8" full opening everywhere and I will bet you don't. Give extra attention to the anti-siphon valve; if you determine that it's necessary for safety, then get it in 1/2" in and out...not common but available. |
Originally Posted by LOTOWONTOPGUN
(Post 4488669)
http://www.vortechsuperchargers.com/
The only one to go with. It's going to make your nice dog into a mad dog. Or like putting your foot in a Hornets nest. Vortech does it right the first time to last a long time. And you can clean the chiller on a Vortech. Can not do that with the Procharger chiller. |
I spin a 27p mirage plus to 5100-5200 on a 500hp motor in my 22 donzi. If you can spin a 30 pitch 3 blade to 500 with 620hp then you Ancor is dragging behind you.
|
I will look into the vortechs
|
My uncles boat is the 24 Checkmate stilleto open bow. He ran 69 on gps with a stock 454mag. After he got the procharger put on from kunkles marine. They also did fuel system upgrade he now runs 85 gps. The boat is a handful but the accelleration is awesome. I have to say I'm impressed. It is to be seen how it does for reliability so far 1 summer all good. I can put you in contact with him if you like...he'll chew your ear off. Lol
|
Originally Posted by AE Stream
(Post 4488908)
My uncles boat is the 24 Checkmate stilleto open bow. He ran 69 on gps with a stock 454mag. After he got the procharger put on from kunkles marine. They also did fuel system upgrade he now runs 85 gps. The boat is a handful but the accelleration is awesome. I have to say I'm impressed. It is to be seen how it does for reliability so far 1 summer all good. I can put you in contact with him if you like...he'll chew your ear off. Lol
|
He lives south of Rochester, Ny and boats on Keuka Lake
|
Where is kunkles located
|
Originally Posted by rbrtbarker3
(Post 4489270)
Where is kunkles located
http://www.kunkelsmarine.com/ |
Originally Posted by rbrtbarker3
(Post 4489270)
Where is kunkles located
|
| All times are GMT -5. The time now is 12:03 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.