Trim line fittings and water line fittings
Who makes parts or fittings to adapt to the bravo gimbal assembly so I can extend my water connection and my trim lines. I just installed my IMCO extension box and I need a little extra to make all these work. Thanks
|
Got the water line figured out with a plate and a nipple and extended water line. The Trim lines I guess I'll have to make up my own with adapters at the transom assembly and then use AN line and change the fittings at the pump.
|
Extend them. They should be 3/16 reverse flare
|
Originally Posted by class6
(Post 4517296)
Extend them. They should be 3/16 reverse flare
|
All times are GMT -5. The time now is 06:17 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.