Offshoreonly.com - Where to get cheep aluminum in Ohio

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Where to get cheep aluminum in Ohio (https://www.offshoreonly.com/forums/do-yourself-boating-budget/344480-where-get-cheep-aluminum-ohio.html)

justintocars

02-11-2017 10:15 AM

Quote:

Originally Posted by kidturbo (Post 4527839)

Yeah I've purchased several sheets of diamond plate cheap there also. Been a while and forgot the name, but thanks to google..

Stargate Alloys
799 Goodale Blvd, Columbus, OH 43212
(614) 224-4404

right place?

That's awesome... IV heard of a place like that but could never find it. THANKS.

justintocars

02-11-2017 10:24 AM

Quote:

Originally Posted by BenPerfected (Post 4527833)

Justintocars,
Seems to me that there would be an increased amount of conform, safety and less liability in not building a fuel tank as a DIY project.

I respect your opinion, and safety IS paramount! But If I was to build a tank it would be welded by a professional that's been tiging longer than IV been alive, and pressure tested to the standard 4 psi. As far as libality it shouldn't be any different than puting the stock tank back in... Or selling an older boat with a rotted tank that is close to failure because no one can see it.

justintocars

02-11-2017 10:31 AM

Quote:

Originally Posted by phragle (Post 4527841)

Have you considered Natty light...its cheap, hydrating, and you have all that leftover aluminum to recycle...

I was going to use some Pabst to lubeercate the stick welder and clean the aluminum while we put it together.

All times are GMT -5. The time now is 11:19 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page