|
Originally Posted by dereknkathy
(Post 4558891)
put your hand on that solenoid. Have somebody hit key. Feel it click? But engine didn't crank. Jump across those 2 big terminals. Hear starter crank? You just tested it now you know solenoid is bad.
|
Thanks, Tried what you said, the slave solenoid clicked. Have one on order, just waiting for it to arrive and will check it out. Thanks again. I am also looking for a screw that came off my alpha drive , which is part of the Continuity kit. Do I have to buy the whole kit , or can i just get the screw. Thanks
|
No. They are stainless steel screws. Pull one the same size to get thread size and whether fine or coarse thread. Take it to a hardware store.
|
Thanks, It was the Slave solenoid. I appreciate the help. Will try the hardware store for the screw on the drive for continuity. On a lighter note, how do i post a picture of my boat with the profile. Thanks.
|
Originally Posted by Baja 240 sport
(Post 4560925)
Thanks, It was the Slave solenoid. I appreciate the help. Will try the hardware store for the screw on the drive for continuity. On a lighter note, how do i post a picture of my boat with the profile. Thanks.
|
| All times are GMT -5. The time now is 03:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.