Installing Fisher Panda 4200k -- quick question
#1
Registered
Thread Starter
Join Date: Jun 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Installing Fisher Panda 4200k -- quick question
What you see above is from the manual. Below is what I actually have. My muffler/waterlock is right below the Generator. At first read I thought I needed 23 5/8" (600 MM) to stop the backwash effect to the generator. However, the last sentence seems to be saying the higher the muffler the better and in my case that would be great!!! Am I correct??? Logically in my mind this shorter hose would be less backwash. Any confirmation would be greatly appreciated.