Gantry Cranes
What are you guys using for Gantry or A-Frame cranes to pull your power? A friend has a cheapie i've used before but that thing makes me nervous! Northern has a decent one 10' wide 10' tall. I figured a little taller might be nice.
|
mine is 15 high and 15 wide,the extra height is nice for the boats with a lot of free board.
|
Originally Posted by mike tkach
(Post 4584849)
mine is 15 high and 15 wide,the extra height is nice for the boats with a lot of free board.
|
I have a Wallace aluminum adjustable.
https://www.wallacecranes.com/produc...rtable-cranes/ |
Mines 11' high and 9' wide, I plan to make it wider with a longer beam but works for now..craigslist is your friend..
|
10 foot wont get it up, out and over the transom. At least it didnt work for me. I had to borrow a tow motor.
|
A local tow truck can also pluck that baby and set her back in for not more than beer money.
|
Originally Posted by Baja Rooster
(Post 4584906)
A local tow truck can also pluck that baby and set her back in for not more than beer money.
|
I built one out of wood. Needed 12' of vertical and it barely cleared the transom. $120 worth of lumber and a 1 ton chain fall worked perfect.
|
Originally Posted by sutphen 30
(Post 4584881)
where did you get yours?sounds nice
|
All times are GMT -5. The time now is 09:07 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.