Offshoreonly.com - Cast vs ductile(nodular) vs billet flywheels

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)

- - Cast vs ductile(nodular) vs billet flywheels (https://www.offshoreonly.com/forums/do-yourself-boating-budget/351158-cast-vs-ductile-nodular-vs-billet-flywheels.html)

ezstriper

12-09-2017 08:38 AM

there is very little load on a flywheel in a setup like this, more load on the rubber in the coupler which will fail WAY before the flywheel ever would, + at the RPM's we turn...again no issues, that not to say anything can fail, but have to be a bad part I would think

getrdunn

12-09-2017 07:50 PM

Quote:

Originally Posted by 14 apache (Post 4598367)

I have run them in my boats stock gm flywheels never a problem 6500-rpm Than I made some aluminum ones on the Bridgeport.

How much weight difference. I bet the idle got a little rattier.

BenPerfected

12-12-2017 03:33 PM

We tried aluminum flywheels and it killed idling in gear....PITA. Sold them and when to neutral balanced cast iron.

All times are GMT -5. The time now is 04:12 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page